17-21SYGC资料

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet

0805 Package Chip LED(1.0mm Height)

17-21SYGC/S530-XX/TR8 Features

․Package in 8mm tape on 7〞diameter reel.

․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow

solder process. ․Mono-color type. ․Pb-free.

․The product itself will remain with in RoHS compliant version.

Descriptions

․The 17-21 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.

․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in telephone and fax.

․Flat backlight for LCD, switch and symbol. ․General use.

Device Selection Guide

Part No.

17-21SYGC/S530-XX/TR8

Chip Material AlGaInP

Emitted Color Brilliant Yellow Green

Resin Color Water Clear

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 1 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua

元器件交易网www.cecb2b.com

EVERLIGHT ELECTRONICS CO.,LTD.

17-21SYGC/S530-XX/TR8

Package Outline Dimensions

-+1.05

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 2 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua

元器件交易网www.cecb2b.com

EVERLIGHT ELECTRONICS CO.,LTD.

17-21SYGC/S530-XX/TR8

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation ElectrostaticDischarge

(HBM)

Operating Temperature Storage Temperature Soldering Temperature

VR 5 IF 25 IFP 60 Pd 60 ESD 2000 Topr Tstg Tsol

-40 ~ +85 -40~ +90

Reflow Soldering:260 ℃ for 10 sec Hand Soldering:350℃ for 3 sec

Unit V mA mA mW V ℃ ℃

Electro-Optical Characteristics (Ta=25℃)

Parameter

Symbol

*Chip Rank

Min. Typ. Max. Unit Condition

Luminous Intensity Iv

E1 12 17 ----- E2 17 23 ----- mcd

E3 22 31 ----- E4 27 41 ----- IF=20 mA

Viewing Angle Peak Wavelength

Dominant Wavelength

2θ1/2 ----- ----- 140 ----- deg λp ----- ----- 575 ----- nm λd ----- ----- 573 ----- nm △λ ----- ----- 20 ----- nm VF

Spectrum Radiation Bandwidth Forward Voltage

----- ----- 2.0 2.4 V

μA

VR=5V

Reverse Current

IR ----- ----- ----- 10

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 3 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua

元器件交易网www.cecb2b.com

EVERLIGHT ELECTRONICS CO.,LTD.

17-21SYGC/S530-XX/TR8 Typical Electro-Optical Characteristics Curves

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 4 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua

元器件交易网www.cecb2b.com

EVERLIGHT ELECTRONICS CO.,LTD.

17-21SYGC/S530-XX/TR8 Label explanation

CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm, Unit = mm

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 5 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua

元器件交易网www.cecb2b.com

EVERLIGHT ELECTRONICS CO.,LTD.

17-21SYGC/S530-XX/TR8 Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel

Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Moisture Resistant Packaging LabelAluminum moisture-proof bagDesiccantLabel

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 6 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua 元器件交易网www.cecb2b.com

EVERLIGHT ELECTRONICS CO.,LTD.

17-21SYGC/S530-XX/TR8 Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10%

Test Sample

No. Items Test Condition Ac/Re

Hours/Cycles Size

Temp. : 260℃±5℃

1 Reflow Soldering 22 PCS.0/1 6 Min.

Min. 5sec. H : +100℃ 15min

300 Cycles 2 Temperature Cycle ∫ 5 min

L : -40℃ 15min H : +100℃ 5min

3 Thermal Shock ∫ 10 sec

L : -10℃ 5min

High Temperature

Temp. : 100℃ 4

Storage

Low Temperature

Temp. : -40℃ 5

Storage 6 7

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 7 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua

22 PCS.0/1

300 Cycles 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs.

22 PCS.22 PCS.22 PCS.22 PCS.22 PCS.

0/1 0/1 0/1 0/1 0/1

DC Operating Life High Temperature /

High Humidity

IF = 20 mA 85℃/ 85%RH

元器件交易网www.cecb2b.com

EVERLIGHT ELECTRONICS CO.,LTD.

17-21SYGC/S530-XX/TR8 Precautions For Use 1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package : The LEDs should be kept at 30℃ or less and 70%RH or less(Floor life). However, it's recommended that the LEDs should be used within 168 hours (7 days) after opening

the package. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition

3.1 Pb-free solder temperature profile

3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 8 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua

元器件交易网www.cecb2b.com

EVERLIGHT ELECTRONICS CO.,LTD.

17-21SYGC/S530-XX/TR8 4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is

unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 2 Page: 9 of 9 Device No. : DSE-171-103 Prepared date:27-Oct-2007 Prepared by:Zhouhua